MikeLiteHeader.jpg
Fingerlights
Cap Lites
Light Sources
FOD (Foreign Object Debris) Bags
Other Products
[View Cart]
 

Mike Lites

Seitz Scientific Industries Inc. is the original manufacturer of the Mike Lite ("Lip Light"). Only a Seitz "Lite" is authorized by the U.S. Army for use in Army aircraft because only our Mike Lites meet all 20 specifications outlined in the original R&D contract (Contract No. DAAK60-90-C-0041).
 
ML27orML21small.jpg Mike Lite (ML-27)
$49.75
MIKE LITE: (ANVIS Green, normal brightness). This is absolutely the BEST color of green light to use with NVGs. This Mike Lite will soon be the new ML-8. Compatible with all night vision goggles and devices. Preserves dark adaptation. A generation -3- product using 3 ea. LEDs. Has a Push ON - Push OFF switch that can be actuated by the lip or tongue. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. Uses 2 ea. AA batteries (not included).
 
ML18w2AFiltersmall.jpg Mike Lite with NVG Filter (ML18-w2A)
$92.45
MIKE LITE: (ANVIS White). Same light as the ML-18 except this light has three ANVIS WHITE compatible filters, making it the BEST choice for NVG compatible white. Because LEDs do not produce heat they are invisible to FLIR systems. They also work well with Gen III goggles. For use where dark adaptation is not necessary and where a bright, white light is desired. LED average output is 1.2 Fc at 18". LEDs last indefinitely. Uses 2 ea. AA batteries (not included).
 
ML-8M87s.jpg Mike Lite (ML-8)
$49.75
MIKE LITE: (NVG Green light). The standard issue military Mike Lite. Compatible with all night vision goggles and devices. Preserves dark adaptation. A generation -3- product using 3 ea. LEDs for brightness. Has a Push ON - Push OFF switch that can be actuated by the lip or tongue. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. Uses 2 ea. AA batteries (not included).
 
ML_DIM_Front_small.jpg Mike Lite Dimmer (ML-DIM)
$12.35
Mike Lite Dimmer. Works with ALL Mike Lites. Just snap in line between battery pack and Mike Lite. Allows user to increase or decrease light output of any Mike Lite. Optimizes available battery life by allowing user to decrease the Mike Lite output with fresh batteries. As battery life decreases, user slowly increases output to maintain favorite light setting. Also convenient to adjust the light output to compensate for various ambient light conditions as well as different levels of dark adaptation. Also works with Fingerlights if used with the Fingerlight AA Battery Adapter (FLAA).
 
ML-8M87s.jpg Mike Lite (ML-10)
$49.75
MIKE LITE: (Red light). Same as the ML-8 except - has three Red LEDs for light. Preserves dark adaptation. For use in Red lit cockpits. Not for use with NVG operations. Uses 2 ea. AA batteries (not included).
 
Ml-11m87s.jpg Mike Lite (ML-11)
$68.45
MIKE LITE: (IR & NVG Green light). One Infrared LED and Two NVG compatible Green LEDs. Switch from IR to Green at the battery pack. Use Green for NVG compatible light. Use IR to enhance ambient light with NVGs. IR light shines over 150 feet. Uses 2 ea. AA batteries (not included).
 
ML-12DCs.jpg Mike Lite (ML-12)
$61.90
MIKE LITE: (Red & White light). Has Two Red LEDs as the ML-10 and One Xenon lamp as the ML-9. Switch from Red to White at the battery pack. Uses 2 ea. AA batteries (not included).
 
Ml-11m87s.jpg Mike Lite (ML-14)
$61.90
MIKE LITE: (NVG Green & White light). 2ea. NVG compatible Bright White LEDs and 1ea. NVG compatible Bright Green LED. Use Green when preserving dark adaptation is desirable. Use white when seeing colors is necessary. This light will provide the same or better light as the previous version of the ML-14 or ML-14A. The light ships with two battery holders, one for two AA batteries (3.0 volts) and one for three AA batteries (4.5 volts). Optional battery configurations include two or three AAA batteries for 3.0 or 4.5 volt options (not included).
 
ML-8M87s.jpg Mike Lite (ML-15)
$61.90
MIKE LITE: (2ea. Red LEDs and 1ea) NVG compatible White LED. Use red when preserving dark adaptation is desirable. Use White when seeing colors is necessary. While the White Light is not as bright as the Xenon lamp on the ML-14 or ML-14A it is a LED and will not break if dropped. Also the White LED uses far less power than the Xenon lamp and will burn continuously for 7 days on a pair of AA batteries.
 
ML-8M87s.jpg Mike Lite (ML-18)
$49.75
MIKE LITE: (White light). Has three White LEDs. Because LEDs do not produce heat they are invisible to FLIR systems. They also work well with Gen III goggles. For use where dark adaptation is not necessary and where a bright, white light is desired. LED average output is 1.2 Fc at 18". LEDs last indefinitely. Uses 2 ea. AA batteries (not included).
 
ML-8M87s.jpg Mike Lite (ML-19)
$61.90
MIKE LITE: (White & IR light). One Infrared LED and Two NVG compatible White LEDs. Switch from IR to White at the battery pack. Use White for NVG compatible light. Use IR to enhance ambient light with NVGs. IR light shines over 150 feet. Uses 2 ea. AA batteries (not included). Because LEDs do not produce heat they are invisible to FLIR systems. They also work well with Gen III goggles. For use where dark adaptation is not necessary and where a bright, white light is desired. LED average output is 1.2 Fc at 18". LEDs last indefinitely. Uses 2 ea. AA batteries (not included).
 
Ml-8m162s.jpg Mike Lite (ML-20)
$61.90
MIKE LITE: (IR light). Has three IR LEDs. Because LEDs do not produce heat they are invisible to FLIR systems. The IR works well with all goggles. For use where ambient light is not available. The three IR LEDs will emit IR light that the goggles can see for 200' or more. LEDs last indefinitely. Uses 2 ea. AA batteries (not included).
 
ML27orML21small.jpg Mike Lite (ML-21)
$49.75
MIKE LITE: (ANVIS Green, Bright). This is absolutely the BEST color of green light to use with NVGs. This Mike Lite is the same as the ML-27, just brighter. Compatible with all night vision goggles and devices. Preserves dark adaptation. A generation -3- product using 3 ea. LEDs. Has a Push ON - Push OFF switch that can be actuated by the lip or tongue. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. Uses 2 ea. AA batteries (not included).
 
ML-8M87s.jpg Mike Lite (ML-22)
$61.90
MIKE LITE: (2ea. NVG compatible Standard Green LEDs and 1ea. NVG compatible White LED) Use Green when preserving dark adaptation is desirable. Use White when seeing colors is necessary. Uses two AA batteries.
 
Ml-8m162s.jpg Mike Lite (ML-23)
$61.90
MIKE LITE: 2ea. NVG compatible Bright Green LEDs and 1ea. NVG compatible White LED. Use Green when preserving dark adaptation is desirable. Use White when seeing colors is necessary. Uses two AA batteries.
 
ML-24onMFSs.jpg Mike Lite (ML-24)
$119.90
MAXILLO MIKE LITE: (NVG Green light). Compatible with all night vision goggles and devices. Preserves dark adaptation. Uses 2 ea. AA batteries (not included). Can be used on the standard M-87 or the M-162 Tempest microphone, or other like microphone. The second light attaches to a Maxillo face shield. A switch on the battery pack switches between the inside and the outside light. A generation -3- product using 3 ea. LEDs for brightness. Has a Push ON - Push OFF switch that can be actuated by the lip or tongue.  A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. DOES NOT INCLUDE MAXILLO FACE SHIELD.
 
ML-24onMFSs.jpg Mike Lite (ML-24A)
$119.90
MAXILLO MIKE LITE: (Bright NVG Green light). Compatible with all night vision goggles and devices. Preserves dark adaptation. Uses 2 ea. AA batteries (not included). Can be used on the standard M-87 or the M-162 Tempest microphone, or other like microphone. The second light attaches to a Maxillo face shield. A switch on the battery pack switches between the inside and the outside light. A generation -3- product using 3 ea. Bright LEDs for brightness. Has a Push ON - Push OFF switch that can be actuated by the lip or tongue.  A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. DOES NOT INCLUDE MAXILLO FACE SHIELD.
 
ML-24onMFSs.jpg Mike Lite (ML-25)
$119.90
MAXILLO MIKE LITE: (NVG White light). Compatible with all night vision goggles and devices. Uses 2 ea. AA batteries (not included). Can be used on the standard M-87 or the M-162 Tempest microphone, or other like microphone. The second light attaches to a Maxillo face shield. A switch on the battery pack switches between the inside and the outside light. A generation -3- product using 3 ea. LEDs for brightness. Has a Push ON - Push OFF switch that can be actuated by the lip or tongue.  A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. DOES NOT INCLUDE MAXILLO FACE SHIELD.
 
ML-24onMFSs.jpg Mike Lite (ML-25A)
$119.90
MAXILLO MIKE LITE: (Bright NVG White light). Compatible with all night vision goggles and devices. Uses 1ea. 9V.battery (not included). Can be used on the standard M-87 or the M-162 Tempest microphone, or other like microphone. The second light attaches to a Maxillo face shield. A switch on the battery pack switches between the inside and the outside light. A generation -3- product using 3 ea. Bright LEDs for brightness. Has a Push ON - Push OFF switch that can be actuated by the lip or tongue.  A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. DOES NOT INCLUDE MAXILLO FACE SHIELD.
 
mk-1s.JPG Mount Kit (MK-1)
$4.95
MOUNT KIT: Mounts the Mike Lites above to a variety of aviator microphones. Comes with an assortment of clips to attach the Mike Lite to all but the thinnest of mike booms. Of course like all of our products it is guaranteed to work. NOTE: This item not required for military helmets using the standard M-87 or the M-162 Tempest microphones such as the SPH-4 and HGU-56 helmets. All Mike Lites already include necessary hardware to attach to these standard helmets. However, if your unit has replaced the standard microphone with something else, then this MK-1 kit is probably needed. If in doubt, give us a call. 1.800.347.9713
 
mk-1s.JPG Mount Kit for BOSE X (MK1/BOSE)
$3.45
MOUNT KIT: Mounts the Mike Lites above to to the Bose Aviation Headset X.
 
ml2-6as.jpg Protective Cap (ML2-6A)
$0.55
Protective Cap for 9 volt batteries and AA battery holders. Protects your equipment from accidental damaged caused by improperly storing your equipment. Helps to prevent the shorting of the contacts on your equipment.
 
BW-1s.jpg Weight Bag (BW-1)
$5.80
WEIGHT BAG: Black, Cordura Nylon. For holding lead shot used to counterweight NVGs. Comes with a plastic 6 Mil. Zip-Lock bag to hold loose weights securely in the bag. Bag has double flap, and a full width 2" Velcro mounting strip. Bag is 4 1/2" wide X 3 1/2" high. Lead shot not included.
 
ml2-7s.JPG Battery Holder (ML2-7)
$1.70
ML2-7
BATTERY HOLDER: Black plastic, holds 2 ea. AA batteries. This is a replacement battery holder.
 
BG-AAs.jpg Battery Holder Bag (BG-AA)
$3.35
BATTERY HOLDER BAG: Cordura Nylon. Designed to hold a 2AA battery holder like the ML2-7 above. This is a replacement battery holder bag for the Mike Lites and Cap Lites. For lights without a switch on battery connector.
 
BG-AAs.jpg Battery Holder Bag (BG-AA/1)
$3.35
BATTERY HOLDER BAG: Cordura Nylon. Designed to hold a 2AA battery holder like the ML2-7 above. This is a replacement battery holder bag for the Mike Lites and Cap Lites. For lights with a switch on battery connector.
Seitz Home | Shopping Home | Cap Lites | Fingerlights | Light Sources | Other Products