ML-19

1ea IR (Infrared) LED, 2ea. NVIS White LEDs

Switch from IR to NVIS White by a switch on the battery pack. NVIS White compatible with all night vision goggles and devices. IR Enhances ambient light to allow NVGs to see in completely dark, or shadowed areas. The 2ea. White LEDs have a special filter that looks greenish, and combined with these White LEDs Makes this ML-19 NVIS White. NVIS White Allows you to see colors.. The naked eye cannot see the IR light. A generation III product.  The ML-19 has a Push ON - Push OFF switch that can be actuated by the lip or tongue. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. Uses 2 ea. AA batteries (not included).

NOTE: The color of the filter in the picture is blue. The actual filter color is tinted green. Since we have a multitude of Green LEDs this filter is shown as blue to differentiate it from Green LEDs. The actual light emmitted by the lite is White. It will show all the colors in the color spectrum.

Infrared lights cannot be seen by the un-aided eye.
DO NOT PLACE INFRARED LIGHTS UP TO YOUR EYES.

THIS IS A 3.0 VOLT LIGHT. USE 2ea. AA BATTERIES. DO NOT USE A 9.0 VOLT BATTERY.

Includes: 1ea. ML-19, 1ea. header card with mounting instructions, 1ea. 1"x1.75" adhesive backed loop velcro, 1ea. BGAA/1 Battery Holder Bag , 1ea. ML-2-7 (2ea AA battery holder, Plastic), 2ea. wire ties,  1ea. 5/8"x1/8" adhesive backed hook & loop velcro, 1ea. thumb screw, 2ea. insulating shields.