ML-25

3ea. Bright NVIS White LEDs on MAXILLO Face Shield. 3ea.  Bright NVIS White LEDs on Mike

Compatible with all night vision goggles and devices. Allows you to see colors. A generation III product. The Toggle Switch on the Battery Snap alternates between the LEDs on the MFS (MAXILLO Face Shield), and the LEDs on the Microphone. The Switch on the Microphone is a Push ON - Push OFF switch that can be actuated by the lip or tongue. This switch will activate whichever LEDs have been selected by the switch on the Battery Snap. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. There is a quick disconnect on the MFS light which allows the MFS to be easily removed. Uses 2ea. AA batteries (not included). Maxillo Face Shield not included.

NOTE: The color of the filter in the picture is blue. The actual filter color is tinted green. Since we have a multitude of Green LEDs this filter is shown as blue to differentiate it from Green LEDs. The actual light emmitted by the lite is White. It will show all the colors in the color spectrum.

THIS IS A 3.0 VOLT LIGHT. USE 2ea. AA BATTERIES. DO NOT USE A 9.0 VOLT BATTERY.

Includes: 1ea. ML-25, 1ea. header card with mounting instructions, 1ea. 1"x1.75" adhesive backed loop velcro, 1ea. BGAA/1 Battery Holder Bag , 1ea. ML-2-7 (2ea AA battery holder, Plastic), 6ea. wire ties, 1ea. 5/8"x1/8" adhesive backed hook & loop velcro, 1ea. thumb screw, 1ea. 0.5"x1.25" aluminum clip w/ 2pcs. bonding tape & bonded to mount the CL body to the MFS, 1ea. ML-Dim, 2ea. insulating shields.